350mm (14 Inch) Cold Saw Blades

350mm blades are the 14 inch cold saw size (350mm is 13.78 inches). Pick the blade type by what you cut: mild and structural steel โ M2 HSS, stainless and hard alloy steel โ TiAlN coated, aluminum, copper and brass โ carbide-tipped.
Then match the bore (arbor) to your saw’s spindle: we stock 32 and 40mm across the range, plus 50mm in M2 HSS. HSS and TiAlN blades are 2.5 or 3mm thick and toothed for your cut when you order. Carbide-tipped blades have a 3.2mm kerf, come in 60, 80 or 100 teeth, and are for high-RPM saws. Not sure your saw takes 350mm? Send us the make and model and we’ll confirm.
Which 14 inch cold saw blade do you need?
| M2 HSS | TiAlN coated | Carbide-tipped | |
|---|---|---|---|
| Cuts | Mild and structural steel, non-alloy tool steel up to 700 N/mmยฒ | Stainless steel, hard alloy steel above 800 N/mmยฒ | Aluminum, copper, brass โ non-ferrous only |
| Saw | Manual and semi-automatic cold saws | Cold saws | High-RPM saws |
| Thickness / kerf | 2.5 or 3mm | 2.5mm | 3.2mm |
| Bores in 350mm | 32, 40, 50mm | 32, 40mm | 32, 40mm |
| Teeth | Set to your cut at checkout | [ADD: confirm set at checkout] | 60, 80 or 100 (fixed) |
| 350mm price | $159.04โ$174.97 | $201.95 | $229.97โ$242.97 |
| Shop | All M2 HSS | All TiAlN | All carbide-tipped |
Using a carbide-tipped blade on steel or stainless wears the tips fast. Use M2 HSS or TiAlN for ferrous work.
All 350mm blades we stock
| Blade | Thickness | Bore | Teeth | Price |
|---|---|---|---|---|
| M2 HSS | 2.5mm | 32mm | Your choice | $159.04 |
| M2 HSS | 2.5mm | 40mm | Your choice | $159.04 |
| M2 HSS | 3mm | 32mm | Your choice | $174.97 |
| M2 HSS | 3mm | 40mm | Your choice | $174.97 |
| M2 HSS | 3mm | 50mm | Your choice | $174.97 |
| TiAlN coated | 2.5mm | 32mm | [ADD] | $201.95 |
| TiAlN coated | 2.5mm | 40mm | [ADD] | $201.95 |
| Carbide-tipped | 3.2mm | 32mm | 60 | $229.97 |
| Carbide-tipped | 3.2mm | 32mm | 80 | $235.97 |
| Carbide-tipped | 3.2mm | 32mm | 100 | $242.97 |
| Carbide-tipped | 3.2mm | 40mm | 80 | $235.97 |
| Carbide-tipped | 3.2mm | 40mm | 100 | $242.97 |
Link each row to its product page.
Choosing a 350mm blade: checklist
- Material first โ it decides the blade type (table above).
- Bore โ match your saw's spindle: 32, 40 or 50mm. A blade with the wrong bore will not mount.
- Thickness โ order the thickness your saw and current blade use. [ADD: one line on 2.5mm vs 3mm in HSS]
- Teeth โ for HSS, aim for 3โ6 teeth in the cut on your thinnest wall and tell us the material at checkout. For carbide, [ADD: one line on when to pick 60 vs 80 vs 100 teeth].
- Drive pins โ HSS blades are drilled for all saw manufacturers, so the pin pattern won't stop a fit.
Wrong size? See 315mm (12.4 in) or 370mm (14.6 in) blades.
FAQ (below the buying guide; replaces the current 3)
14 inch cold saw blade FAQ
Is a 350mm cold saw blade the same as a 14 inch blade?
Yes. 350mm is 13.78 inches and is the standard 14 inch cold saw blade size.
What can a 350mm cold saw blade cut?
That depends on the blade type: M2 HSS cuts mild and structural steel, TiAlN coated cuts stainless and hard alloy steel, and carbide-tipped cuts aluminum, copper and brass only.
What bore size do I need for a 14 inch blade?
The bore must match your saw's spindle; we stock 350mm blades in 32 and 40mm bores, plus 50mm in M2 HSS. Check your saw manual or the bore on your current blade, or send us the saw make and model.
Which 14 inch saws do these blades fit?
Our 350mm M2 HSS blades fit Brobo, Bolton, Haberle, Scotchman, Doringer and other 350mm cold saws, and are drilled for every manufacturer's drive pins. Carbide-tipped blades are for high-RPM saws such as KMT.
Can I get 350mm blades resharpened?
Yes. M2 HSS and TiAlN blades are resharpenable, and we offer cold saw blade sharpening.