If your cold saw takes a 350 mm blade on a 32 mm arbor, this is the blade for it. The 350 x 2.5 x 32 mm M2 HSS cold saw blade is made from M2 high-speed steel, which holds its hardness at the temperatures friction generates in the cut, so the edge lasts through production work rather than softening. The fine-toothed design gives clean, burr-free finishes on steel tube, pipe and solid bar, which cuts down the secondary deburring that slows a line.
You will need a tooth count to order. Teeth are chosen from what you are cutting – wall thickness and section size – not from the saw. Use our Cold Saw Blade & Tooth Finder, or call (800) 397-8511 and one of our team will specify it with you.
What this blade fits
- Blade diameter: 350 mm – sold as the 14 inch size (350 mm is 13.78 inches exactly).
- Arbor / bore: 32 mm. This is the number to check on your saw. If yours takes a 40 mm arbor, order the 350 x 2.5 x 40 mm M2 HSS blade instead.
- Body thickness / kerf: 2.5 mm – the width of material removed on each cut.
- Drive pin holes: 2/8/45, 2/11/63 and 4/9/50 configurations, so the blade mounts across a range of machines without adaptation.
- Cold saws: Baileigh, Brobo, Dake, JET, KMT, MEP and Wilton among others. Browse all 350 mm cold saw blades or the full M2 HSS range.
Not certain your saw takes this size? Send us the make and model through the blade recommendation form and we will confirm it before you buy.
What it cuts
This is a ferrous-metal blade. It is built for steel tube, pipe and solid bar in:
- Fabrication shops that need repeatable, consistent cuts
- Production environments running high volumes of tube and pipe
- Structural steel work cutting solid bar
Cutting aluminium, brass or copper? Non-ferrous metals need a different tooth geometry, so use a carbide-tipped blade instead – the 350 x 3.2 x 32 mm 80 tooth carbide-tipped blade takes the same 32 mm arbor.
Specifications
| Blade diameter | 350 mm (13.78 in) – sold as 14 inch |
|---|---|
| Body thickness / kerf | 2.5 mm |
| Arbor / bore | 32 mm |
| Blade material | M2 high-speed steel |
| Tooth count | Specified by you at checkout |
| Drive pin configurations | 2/8/45, 2/11/63, 4/9/50 |
| Cuts | Ferrous metals – steel tube, pipe, solid bar |
| SKU / MPN | CSBS-250250 |
| Blade weight | 3.9 lbs |
| Shipping carton | 14 × 14 × 1 in |
Frequently asked questions
What size arbor does this blade need?
This blade has a 32 mm bore, so it fits cold saws with a 32 mm arbor. If your saw takes a 40 mm arbor, order the 350 x 2.5 x 40 mm version instead.
Is 350 mm the same as a 14 inch blade?
Yes. 350 mm is the metric size sold as 14 inch in the US – the exact conversion is 13.78 inches.
Will the drive pins line up with my saw?
This blade is drilled in three configurations – 2/8/45, 2/11/63 and 4/9/50 – so it mounts on a wide range of cold saws without an adapter. If you are not sure which your machine uses, send us the make and model and we will check it.
How many teeth should I order?
Tooth count depends on what you are cutting – mainly wall thickness and section size – not on the saw. Use the Cold Saw Blade & Tooth Finder, or call (800) 397-8511 and we will specify it with you.
Can I cut aluminium with it?
No – this is a ferrous-metal blade for steel tube, pipe and solid bar. Non-ferrous metals need a carbide-tipped blade with a different tooth geometry.
Does it ship the same day?
Orders placed before 3:30 pm EST ship the same day. Ground shipping is free on any order with 3 or more blades using code FREESHIP (US lower 48 only).
If you are unsure whether this blade suits your machine, or you need help with tooth count, email us or call 1.800.397.8511 and one of our team will help you specify it.
