This is an aluminum and non-ferrous blade, not a steel-cutting blade. The 350 x 3.2 x 32 mm carbide-tipped blade runs 60 carbide teeth for clean, burr-free cuts in aluminum, copper and brass, with minimal material waste. It is built for the work where finish quality shows: window frames, extrusions and sheet metal. The carbide tips hold their edge far longer in soft metals than a steel blade would, which is why non-ferrous production work uses carbide rather than HSS.
Check your saw’s speed before you order. This blade is designed for high-RPM saws. Cold saws built for steel run at low spindle speeds and are a different class of machine. If you are not sure what your saw runs at, call (800) 397-8511 with the make and model and we will tell you whether this blade suits it – it takes a minute and it saves a blade.
What this blade fits
- Blade diameter: 350 mm – the 14 inch size (350 mm is 13.78 inches exactly).
- Arbor / bore: 32 mm. Check this against your saw. If yours takes a 40 mm arbor, we stock the same blade in 80 tooth and 100 tooth with a 40 mm bore.
- Kerf: 3.2 mm – the width of material removed on each cut.
- Machine type: high-RPM saws. See the note above.
- Saw brands: KMT and MEP among others. Browse the full carbide-tipped non-ferrous range.
What it cuts
Non-ferrous metals only – aluminum, copper and brass. Typical work:
- Aluminum window and door frames
- Extrusions and profiles
- Sheet metal
Cutting steel or stainless? This is the wrong blade – carbide tips are made for soft metals and will not last in ferrous work. Use an M2 HSS cold saw blade instead, or a TiAlN coated blade for stainless and harder alloys.
Choosing your tooth count
We stock this blade in three tooth counts with a 32 mm bore. Everything else about them is identical, and the price difference across the range is $13.
| Teeth | Price | Blade |
|---|---|---|
| 60 | $229.97 | This blade |
| 80 | $235.97 | 350 x 3.2 x 32 mm, 80 tooth |
| 100 | $242.97 | 350 x 3.2 x 32 mm, 100 tooth |
Not sure which to order? Call (800) 397-8511 with what you are cutting – wall thickness and profile – and we will pick it with you.
Specifications
| Blade diameter | 350 mm (13.78 in) – 14 inch size |
|---|---|
| Kerf | 3.2 mm |
| Arbor / bore | 32 mm |
| Teeth | 60, carbide-tipped |
| Cuts | Non-ferrous only – aluminum, copper, brass |
| Machine | High-RPM saws |
| SKU / MPN | CSBS-3260CTB |
| Blade weight | 4.2 lbs |
| Shipping carton | 14 × 14 × 1 in |
Frequently asked questions
Will this blade fit my saw?
It needs a 32 mm arbor and a high-RPM saw. The bore is easy to check; the speed matters just as much, so if you are unsure call (800) 397-8511 with your saw’s make and model before ordering.
Can I cut steel with it?
No. This is a non-ferrous blade for aluminum, copper and brass – carbide tips are made for soft metals and will not last in steel. Use an M2 HSS cold saw blade for steel instead.
What is the difference between the 60, 80 and 100 tooth versions?
They are the same blade with different tooth counts, and the choice depends on what you are cutting rather than on the saw. The price difference across all three is $13, so call (800) 397-8511 and we will pick the right one with you.
Will it fit a 40 mm arbor?
No – this blade has a 32 mm bore. We stock the same blade with a 40 mm bore in 80 tooth and 100 tooth.
What does 3.2 mm kerf mean?
The kerf is the width of material the blade removes on each cut, so a 3.2 mm kerf takes 3.2 mm of stock per cut. It is wider than our HSS blades because carbide-tipped teeth are thicker than the blade body.
Does it ship the same day?
Orders placed before 3:30 pm EST ship the same day. Ground shipping is free on any order with 3 or more blades using code FREESHIP (US lower 48 only).
